Filter
Top Products
35
USING WITH
PEER-TO-PEER
UTILITY
Complete the field of each required
item.
● [IP Address]
Input the IP address of the printer.
● [Name]
Input the printer name you desire. The port
name is name input here.
● [Port]
In most cases, this does not need to be set.
Input the value obtained by adding 1 (one) to
the “Base Port Number” in the NetPanel “NIC
Configure - IP Configuration.”
● [Description]
If necessary, input a comment about the printer.
17
Click on [Add].
● If an addition has been made by mistake, click
on the added printer then click on [Delete].
18
The printer is added to the [Available
Printers] list.
19
Click on [OK].
20
21
Click on [OK].
● The completion message is displayed.
22
Click on the [OK].
SUPPLEMENTS:
● After the peer-to-peer utility for TCP/IP is installed, please continue the operation for
installing the printer driver.
● The “IP-P2P” program group and icon are added to the Start Menu. You can re-
configure using the program.
● If you make a change in the "Print Names" section, upon closing the program, it
prompts you to reboot the computer. Click on [OK] and restart your computer.
23
Next, installing the printer driver:
● For installing the printer driver, see
“INSTALLING THE PRINTER DRIVER for
Windows” on later pages.