Filter
Top Products
12
Setup for the Peer-to-Peer Type Network
Instructions for set-up on a Peer-To-Peer TCP/IP, IPX/SPX, and the AppleTalk (Ethernet)
Network.
TCP/IP IPX/SPX
• Assign the IP address, Subnet Mask, and
Gateway address. (See “
NETWORK SETUP -
ASSIGNING IP ADDRESS
”.)
• Configure the Novell Settings. (See
“NETWORK SETUP - NOVELL SETTINGS”)
Control Panel
Setup
Install the
Printer Driver
Install the
Peer-to-Peer
Utility
For Windows
For Macintosh
Assign the IP address, Subnet Mask, and
Gateway address. (See “NETWORK SETUP
- ASSIGNING IP ADDRESS”.)
Install the Peer-To-Peer Utility for TCP/IP.
(See “
USING WITH PEER-TO-PEER UTILITY
- Peer-to-Peer Utility for TCP/IP Setup
”.)
Install the Peer-To-Peer Utility for IPX/SPX.
(See “
USING WITH PEER-TO-PEER UTILITY
- Peer-to-Peer Utility for IPX/SPX Setup
”.)
Install the appropriate Printer Driver for the
Operating System used and configure options.
(See “INSTALLING THE PRINTER DRIVER for
Windows”.)
Install the appropriate Printer Driver for the
Operating System used and configure options.
(See “INSTALLING THE PRINTER DRIVER for
Windows”.)
Control Panel Setup • Assign the IP address, Subnet Mask, and Gateway address. (See
“ASSIGNING IP ADDRESS”.)
• Enable the AppleTalk. (See “NETWORK SETUP - APPLETALK
SETTING”)
Install Printer Driver Copy the PPD file and select the printer. (See “INSTALLING THE
PRINTER DRIVER for Macintosh” .)
AppleTalk Setup Setup AppleTalk using MAP. (See “MAP - AppleTalk Setup”.)
Printer Specific Options Setup Configure the Printer Specific Options. (See “INSTALLING THE
PRINTER DRIVER for Macintosh - Printer Specific Options”.)