Filter
Top Products
153
NETPANEL
FUNCTION
NOTE:
● Before installing the NetPanel, please be sure to exit from all programs in Windows.
● Before installing the NetPanel, make sure that an IP Address has been assigned to the
e-STUDIO16/20/25 and the Windows NT 4.0 server or workstation.
SUPPLEMENTS:
● To install the NetPanel to Windows NT4.0, “Full Control” access rights will be
necessary. A log on must be performed as a member of the Administrators or Power
Users group. For further details on access rights, see the Windows manual.
● Before installing the NetPanel to Windows NT4.0, Microsoft Personal Web Server (for
Windows NT4.0 workstation) or Microsoft Internet Information Server (for Windows NT
4.0 Server) must be installed. These are included on the Windows NT4.0 Option Pack
4.0 CD-ROM that is provided from Microsoft. For further detail about the Windows
NT4.0 Option Pack, see the Microsoft homepage.
● Before installing the NetPanel to Windows 2000 or Windows XP, Microsoft Internet
Information Server 5.0 must be installed. These are included on the Windows 2000 or
Windows XP CD-ROM.
The following describes how to install the NetPanel from the CD-ROM attached with the Printer
Kit.
1
Insert the CD-ROM into the CD-ROM
drive.
● The menu screen appears.
● If the menu screen is not automatically
displayed, or when the NetPanel is installed via
the network, double-click on “TOSHIBA_e-
STUDIO16_20_25.exe” in the Menu folder of the
CD-ROM, which is found in Windows Explorer.
Installing
2
Click on a language of your Operating
System.