Filter
Top Products
9-6
C
HAPTER
9: C
ONFIGURING
IPX R
OUTING
3 Define the Route by entering the following fields:
■
Network Address — The address of the network.
■
Gateway Network — The address of the router that joins the
networks.
■
Gateway Node Address — The hardware address of the gateway
node.
■
Metric — The number of routers (1-15) through which data packets
travel before reaching their destination.
■
Tick — A tick represents how far away the destination is for a data
packet (in seconds).
4 Click Submit. To clear the fields, click Reset.
5 To delete a route from your configuration, select the route and click
Delete.
Adding a Framed IPX
Route to a Remote
Site (WAN)
To add, modify, or delete a framed route to a Remote Site, follow these
steps:
1 Select Configuration > Remote Sites (WAN).
2 Select the remote site to modify, and click Modify.
3 Continue clicking Next to advance through the ATM Modify, IP Modify,
IP Advanced Modify screens to get to the IPX Modify screen.
4 Click Framed Routes.
5 Click Add to define the following parameters:
840ug.book Page 6 Friday, July 7, 2000 2:23 PM