Filter
Top Products
Configuring IPX Static and Framed Services
9-9
Adding a Framed IPX
Service to a Remote
Site (WAN)
To add, modify, or delete a framed service for a remote site:
1 Select Configuration > Remote Sites (WAN).
2 Select the remote site to modify, and click Modify.
3 Continue clicking Next to advance through the ATM Modify, IP Modify,
IP Advanced Modify screens to get to the IPX Modify screen.
4 Click Framed Services.
5 Click Add to define the following parameters:
■
Server Name — The name of the remote server.
■
Server Network Address — The network address of the remote
server.
■
Server Node Address — The node address of the remote server.
■
Socket — The socket number on the remote server.
■
Hops — The number of routers (1-15) the packets travel through
before reaching their destination server.
■
Server Type — You can either select the type of server the framed
service is connected to, or enter a hex value for the server type.
6 After you have entered the fields, click Submit.
840ug.book Page 9 Friday, July 7, 2000 2:23 PM