Filter
Top Products
IP Wizard and Web Browser Problems
13-5
The Web browser does
not find the
OfficeConnect Remote
840 using its DNS
name (DHCP Smart
Mode in use).
There is a problem
with the LAN
connection.
See “LAN Connection Problems”.
The workstation is on
a different IP subnet
from the 840’s
subnet.
Set the workstation IP configuration
to automatically learn its IP address
from the 840.
The DNS host
configuration has
been changed.
Connect to the OfficeConnect
Remote 840 using the unit’s IP
address, 192.168.200.254 and
correct the DNS information.
DHCP Smart Mode is
not really in use.
Press the reset button on the back
of the 840 while rebooting to
delete the current configuration
and select DHCP Smart Mode.
Unable to log in to the
OfficeConnect Remote
840.
You did not enter a
valid administration
login name and
password.
Use the system default login name
root
and password
!root
.
The unit has no login
name or password
defined.
Do one of the following:
1
Use CLI to add an administration
login profile.
2
Restore the system default login
by deleting the current
configuration using the reset
button on the back of the unit. If
DHCP Smart Mode is used, the
default name
root
and
password
!root
are set for you.
If resetting to Unconfigured Mode,
run the IP Wizard to assign an IP
address and configure the default
login name and password.
Symptom Possible Causes Corrective Action
840ug.book Page 5 Friday, July 7, 2000 2:23 PM