Step-by-Step Guide to Creating Filters Using the OfficeConnect Remote 840 Manager
12-13
As before, select the condition sentence, choose the keyword and
operation and enter the filter value then press “Next” to see the
Condition Summary screen again.
7 When you are satisfied that this filter is complete, press Save Filter on
the Condition Summary screen. This causes the OfficeConnect Remote
840 to write the filter to file and activates the filter. You are returned to
the Filter Summary screen. Now you can add another filter if you want.
Modifying an Existing
Filter Using the
OfficeConnect
Remote 840 Manager
1 Go to Configuration > Global > Filters.
2 Select Create/Modify Filters. On the Create/Modify screen, select
the direction/location of the data traffic where the filter is activate.
3 Press the Next button to bring up the Filter Summary screen for this
direction/location.
4 To delete or modify the filter, select the filter from the pull down box
and press Delete/Modify. This brings up the Filter Delete/Modify
screen. You can delete the filter, modify the name, the enable/disable
status and/or edit the conditions from this screen.
Turning a Filter Off
Using the
OfficeConnect
Remote 840 Manager
1 Go to Configuration > Global > Filters.
2 Select Create/Modify Filters. On the Create/Modify screen, select
the direction/location of the data traffic where the filter is active.
3 Press the Next button to bring up the Filter Summary screen for this
direction/location.
4 To turn off an individual filter, select that filter in the pull down box
and press the Delete/Modify button. On the Filter Modify screen,
disable the filter by unchecking the Enable Filter checkbox and
pressing Modify. Return to the summary screen by pressing < Prev.
840ug.book Page 13 Friday, July 7, 2000 2:23 PM