Ethernet Interface
11-3
Figure 11–1 Throughput Graphs
Ethernet Interface
Interface Status The Interface Status screen provides real-time information about the
interfaces. To bring up this screen, from the OfficeConnect Remote 840
Manager home page, select Monitor > Interface Status. Ethernet
interface information is displayed in the row containing the interface
name eth:1.
The Oper Status column indicates whether the interface link is
operationally up or down. If it is down, there may be a cabling problem.
The Admin Status is set to up by default. If the Admin Status is down,
then the interface has been disabled by a user and will not operate until it
is re-enabled. (Use CLI to enable or disable the operational state.)
840ug.book Page 3 Friday, July 7, 2000 2:23 PM