Configuring IPX RIP and SAP
9-11
Remote Site (WAN)
RIP and SAP
IPX RIP and SAP parameters can be configured on the remote site IPX
Modify screen.
Access this screen by going to the OfficeConnect Remote 840 home
page.
1 Select Configuration > Remote Sites (WAN), and click Modify. This
will access the Remote Sites General Modify Screen.
2 Continue clicking Next to advance through the ATM Modify, IP Modify,
and IP Advanced Modify screens.
3 Click Next to proceed to the IPX Modify screen.
4 Using the IPX Routing box, select the mode for RIP and SAP operation:
■
Broadcast — Send RIP and SAP packets.
■
Broadcast & Listen — Learn from RIP and SAP packets and send RIP
and SAP packets.
■
Listen — Learn from received RIP and SAP packets.
■
Respond Only — Only respond to received RIP and SAP packets.
■
None — Neither send nor receive RIP and SAP packets.
840ug.book Page 11 Friday, July 7, 2000 2:23 PM