Filter
Top Products
Instructions for Internet Access
E-3
If your unit is using ATM, the Remote Sites General Add screen will
contain the following fields:
■
Enter a name to identify the remote site.
■
Set Network Service to PPP over Frame Relay or RFC 1483.
■
If PPP, enter the Authentication Name and Authentication
Password provided to you. You can change the header compression
from the default of none to TCP/IP if you wish.
■
Check Enable Bridging and Enable MAC Encapsulated Routing
boxes according to your service provider’s directions.
2 Click the Add button. This advances you to the ATM Modify screen.
840ug.book Page 3 Friday, July 7, 2000 2:23 PM