Filter
Top Products
11-5
Interface Status
ATM Status The Interface Status screen provides real-time information about the
interfaces. To bring up this screen, from the OfficeConnect Remote 840
Manager home page, select Monitor > Interface Status. ATM interface
information is displayed in the row containing the interface name atm:1
or hdlc:1.
The Oper Status column indicates whether the interface link is
operationally up or down. If it is down, there may be a cabling problem.
The Admin Status is set to up by default. If this field says down, then
the interface has been disabled by a user and will not operate until it is
re-enabled. Use CLI to enable or disable the operational state.
ATM Cell Status You can view real-time cell status from the ATM Status screen. To access
this screen from the OfficeConnect Remote 840 Manager home page,
select Monitor > ATM.
840ug.book Page 5 Friday, July 7, 2000 2:23 PM