Filter
Top Products
3
R
EMOTE
S
ITE
M
ANAGEMENT
Introduction
This chapter provides an overview on managing remote site profiles using
the web browser based OfficeConnect Remote 840 Manager. If you need
information on setting up or initially configuring the unit, see the
OfficeConnect Remote 840 SDSL Router Installation Guide. This section is
divided into the following parts:
■
“Remote Site Overview”
■
“Managing a Remote Site Profile”
■
“Configuring Network Service Information (PPP / RFC 1483 / RFC
1490)”
■
“Configuring ATM Information”
■
“Configuring Protocol Parameters”
■
“Monitoring Remote Site Connections”
Remote Site
Overview
To set up connections over the WAN, a remote site profile must be
created and edited for each remote location you want to connect to.
With this profile, you specify ATM virtual circuit or Frame Relay DLCI
information, protocols, and addresses that determine the method of
connection and communication to the remote site.
You first need to add a remote site profile, and then you modify the
profile to include WAN connection and network information.
The following list summarizes the necessary information.
■
WAN — Network Service (PPP / RFC 1483/RFC 1490) information, and
ATM Virtual Channel (VC) or Frame Relay (DLCI) information
■
IP — IP addresses, address translation tables, static routes, and RIP
usage.
840ug.book Page 1 Friday, July 7, 2000 2:23 PM