Filter
Top Products
Instructions for Internet Access
E-5
1 Configure the Local WAN IP Address:
■
If the ISP provided you with a single IP address, select Specified and
enter that address.
■
If you are using PPP to dynamically assign an address, select Dynamic,
and the remote site on the WAN will assign a local WAN IP address to
you.
■
Otherwise, select Unnumbered, and there will be no IP address
assigned to the VC connection.
■
Configure the Remote WAN IP Address:
■
If the ISP provided a remote IP address and netmask, select Specified
and type in that address and netmask.
■
If the OfficeConnect Remote 840 is learning the remote IP address
from the remote site (PPP only), select Learn From Remote.
■
In order to designate the remote site you are configuring as the
default gateway, check the Use Remote as Default Gateway
checkbox.(Only one remote site can be designated as the default
gateway.)
840ug.book Page 5 Friday, July 7, 2000 2:23 PM