Filter
Top Products
configuration combines sensors, the combination is done in
linear units. If the result of the combination produces a
negative linear value and the displayed units are log
(i.e., dB) this would be an illegal logarithmic operation.
Printer error - A print was requested and this error was
returned.
Request for data from a channel with no sensor connected.
Bit 0: Operation Complete. This bit is set when the *OPC command com
-
pletes and can be used to tell the controller the unit has completed those
commands just sent. See *OPC and *OPC? for more details.
All other bits are not used. The bits above are 488.2 common bits. The
ERRLST command will return an error list giving the state of the DDE
causes.
Related
Commands:
*ESR?, *ESE?, ERRLST
ML2430A OM 6-13
GPIB OPERATION ML24XXA NATIVE COMMANDS
Logical OR
Standard
Event Status Enable
Register
*ESE <NR >
*ESE?
f
Standard
Event Status Register
*ESR?
Power On
User Request
Command Error
Execution Error
Device Dependent Erro
r
Query Error
Request Control
Operation Complete
76543210
76543210
Output Queue
Queue
not empty
6
MSS
RQS
Logical OR
Service
Request
Generation
read by Serial Poll
read by *STB?
Status Byte Register
Service Request
Enable Register
*SRE <NR >
*SRE?
f
7
ESB MAV
3210
7 543210
Figure 6-2. IEEE 488.2 Standard Status Structures