Filter
Top Products
GRDRQ <channel_number>,<Cursor_1_dB>,<Cur
-
sor_2_dB>,<Delta_power>,<Delta_time>[,<Average>]
<Delta_power> and <Delta_time> are absolute values. <Average> is only
present when between cursor averaging is turned ON with the GRAVG
command.
If no data is available, that is, a sensor is not fitted, the profile is not trig
-
gered, or the Power vs. Time graph has not reached to the cursor, the out
-
put for the relevant readout value is 999 output as 9.99e2.
Example result strings might look like:
GRDRQ 1, –10.000, –5.000, 5, 1E-03 (cursor average off)
GRDRQ 1, –10.000, –5.000, 5, 1E-03, –7.5 (cursor average on)
Related
Commands:
GRAVG, GRDATA
GRFS Profile Reference line state
PROFILE SETUP
Syntax:
GRFS <state>
state:
ON or OFF
Remarks:
Turn the profile reference line ON or OFF. The profile reference line is cen-
tered between the top and bottom of the display.
Query:
GRFS?
Returned
String:
GRFS <state>
GRMD Profile, Power vs. Time and Source Sweep Mode Channel
Selection
PROFILE SETUP
Syntax:
GRMD <c>
c:
1 or 2
Remarks:
Selects the channel displayed on the Profile, Power vs. Time and Source
Sweep graphs.
Query:
GRMD?
Returned
String:
GRMD <c>
GRPIX Profile type
PROFILE SETUP
6-42 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION