Filter
Top Products
port:
1 or 2
c:
1 or 2
Remarks:
This command changes the channel represented by BNC output modes
that can take data from either channel 1 or 2, such as “Analog Output” and
“Pass/Fail” modes.
Query:
OBCH? <port>
Returned
String:
OBCH <port>,<c>
OBDSP BNC analog output display stop value
BNC
Syntax:
OBDSP <port>,<units>,<val>
port:
1 or 2
units:
W (Watts)
DB (dB)
DBM (dB)
DBUV (dBmV)
DBMV (dBmV)
val:
0 to 50W
–70 to 47dB
–23 to 94 dBmV
37 to 154 dBmV
Remarks:
Sets up the stop value for the analog out scale of the display.
Query:
OBDSP? <port>
Returned
String:
OBDSP <port>,<units>,<val>
OBDST BNC analog out display start value
BNC
Syntax:
OBDST <port>,<units>,<val>
port:
1 or 2
units:
W (Watts)
DB (dB)
DBM (dB)
DBUV (dBmV)
DBMV (dBmV)
val:
0 to 50W
–70 to 47dB
–23 to 94 dBmV
37 to 154 dBmV
Remarks:
Sets up the start value for the analog out scale of the display.
6-58 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION