Filter
Top Products
Mnemonic Action Supported? Restrictions
RV Read SRE Yes None
SM Status ouput Yes As much as has meaning for ML2430A.
Set to 0 if not used
ST Store setup Yes Limited to 10 stores
TR0 GPIB trigger hold Yes None
TR1 Immediate trigger Yes None
TR2 Settled trigger Yes None
TR3 Trigger hold off Yes None
@1 Status mask Yes None
?ID Return ID string Yes None
NOTES
The Factory cal factor table can be read by sending an ‘F’ instead of the
table number.
The HP 438 emulation mode supports the HP 437 cal factor table com-
mands on the ML2430A Series. This allows the cal factor tables to up-
dated or read since the ML2430A Series supports cal factor tables.
ML2430A OM B-19/B-20
APPENDIX B HP-IB SUPPORT