Filter
Top Products
GPRST Reset min/max graph PROFILE SETUP
Syntax:
GPRST
Remarks:
When profile DATA HOLD mode is set to Min/Max points, this command is
used to reset the min/max values for each data point.
Related
Commands:
GRPIX
GRAUTO Auto scaling
SYSTEM
Syntax:
GRAUTO
Remarks:
Auto scale for all graphic modes (Profile, Source Sweep and Power vs.
Time). This command auto scales the y axis only based on the currently
displayed data.
GRAVG Average between profile cursors
PROFILE SETUP
Syntax:
GRAVG <state>
state:
ON or OFF
Remarks:
Turns on or off averaging between cursors. The data returned by the
GRDRQ command includes the average of all data points between the cur
-
sors if GRAVG is turned ON.
Related
Commands:
GRDRQ
Query:
GRAVG?
Returned
String:
GRAVG <state>
GRCP Connect points on profile
PROFILE SETUP
Syntax:
GRCP <state>
state:
ON or OFF
Remarks:
When set to ON, creates a line graph by connecting the profile data points
together. The default is ON.
Query:
GRCP?
6-40 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION