Filter
Top Products
C-3
CHANNEL MENU
The Channel menu controls the operation of a display channel. There are two
display channels, Channel 1 and Channel 2. Channel 1 appears at the top of the
readout display and channel 2 at the bottom.
Channel
Setup
CHANNEL
1|2
[CHCFG] INPUT configuration
Off|A|B|A-B|B-A|A/B|B/A|EXTV
dual sensor configs NOT in ML2437A
ExtV only available if system setup mode=Readout
[CHUNIT] Measurement UNITS
dB(m)|W|dBuV | dBmV
V when input config = EXT V
[CHRES] Display decimal RESOLUTION
1|2|3
[MNMXS, GMNMX] Tracking MIN/MAX display
On | off
[MMRST] RESET tracked min/max } if MIN/MAX = ON
[REL] Rel 1 } if channel1=ON
[REL] Rel 2 } if channel2=ON
Limits
CHANNEL
1|2
[HLIM] HIGH Limit
-99.99dB to +99.99dB
7dBuV to 207dBuV
-53dBmV to 147dBmV
0to50W
0to20V
[LLIM] LOW Limit
-99.99dB to +99.99dB
7dBuV to 207dBuV
-53dBmV to 147dBmV
0to50W
0to20V
C-6 ML2430A OM
CHANNEL MENU APPENDIX C