Filter
Top Products
OFF Set sensor offset value
Syntax:
OFF<value>
value:
Offset value to add to the sensor reading.
OI? Request identity
Syntax:
OI?
Remarks:
Response: <ML4803>
OMR Output a memory store set of data.
Syntax:
OMR<mem>
mem:
Memory location 1 to 30.
Remarks:
Output a memory store set of data. The output format is as follows:
FREQUENCY: 19 ASCII characters + <CR><LF>
CAL factor: 18 ASCII characters + <CR><LF>
OFFSET value: 18 ASCII characters + <CR><LF>
REFERENCE level: 19 ASCII characters + <CR><LF>
NOTE
When the ODT, OMR, and OPW data output commands
are received simultaneously, only the command which is
received last is valid.
6-90 ML2430A OM
ML4803A EMULATION COMMANDS GPIB OPERATION
5 CHARACTER DATA
<CR><LF>
=MorG
REFERENCE
dBm
.
<CR><LF>
OFFSET
dB
.
<CR><LF>
<CR><LF>
CAL
FREQUENCY
dB
Hz
.
10 1
5
5
1
Figure 6-4. OMR Output Data Format