Filter
Top Products
Appendix B
GPIB Quick Reference
B-1
INTRODUCTION
This appendix contains quick reference tables for all supported com
-
mands. Native mode commands are sorted by functional group. For de
-
tailed command explanations, refer to the page references listed.
B-2
ML24XXA QUICK
REFERENCE
The following tables reference ML24XXA (native) mode commands. A
command followed by a (?) indicates that there is an equivalent query
command for that function (see Table B-13).
Table B-1. BNC Functional Group Commands
Command Function Page
IBBLP Blanking active TTL level 6-41
OBACM(?) AC modulation output polarity 6-57
OBCH(?) BNC output port channel configuration 6-57
OBDSP(?) BNC analog output display stop value 6-45
OBDST(?) BNC analog output display start value 6-58
OBMD(?) BNC output mode select 6-59
OBPL(?) BNC pass/fail pass level 6-59
OBVSP(?) BNC analog output stop voltage scale 6-59
OBVST(?) BNC analog output start voltage scale 6-60
OBZL(?) BNC RF blanking output level 6-60
Table B-2. Calibration Functional Group Commands
Command Function Page
CAL Calibrate the selected sensor to 0 dBm 6-21
RFCAL(?) Turn RF reference calibrator ON or OFF 6-67
VZERO Zero the BNC input connector 6-82
ZERO Zero the sensor 6-82
ML2430A OM B-1