Filter
Top Products
Query:
OBDST? <port>
Returned
String:
OBDST <port>,<units>,<val>
OBMD BNC output mode select
BNC
Syntax:
OBMD <port>,<mode>
port:
1 or 2
mode:
'OFF' (output set to ground) port 1 or 2
'AOUT' (analog scaled output) port 1 or 2
'PASS/FAIL' (pass/fail) port 1 or 2
'SIGA' (signal output sensor A) port 1 only
‘LVLA1’ Signal channel range 1 amplifier output for sensor A
‘LVLA2’ Signal channel range 2 amplifier output for sensor A
‘LVLB1’ Signal channel range 1 amplifier output for sensor B
‘LVLB2’ Signal channel range 2 amplifier output for sensor B
'ACMOD' (AC mod output) port 1 only
'RFB' (RF blanking while zeroing) port 2 only
'SIGB' (signal output sensor B) port 2 only
Remarks:
Changes the type of output selected for the BNC outputs.
Query:
OBMD? <port>
Returned
String:
OBMD <port>,<mode>
OBPL BNC pass/fail pass level
BNC
Syntax:
OBPL <port>,<level>
port:
1 or 2
level:
HIGH (TTL high is PASS)
LOW (TTL low is PASS)
Remarks:
Selects the PASS level for the Pass/fail type of output.
Query:
OBPL? <port>
Returned
String:
OBPL <port>,<level>
OBVSP BNC analog output stop voltage scale
BNC
Syntax:
OBVSP <port>,<val>
ML2430A OM 6-59
GPIB OPERATION ML24XXA NATIVE COMMANDS