Filter
Top Products
Appendix C
Menu Maps
C-1
INTRODUCTION
The ML2430A Series Power Meter is driven by five main menus; Sensor, Chan
-
nel, Trigger, System, and Cal/Zero, each accessed by a key on the front panel.
This appendix contains menu listings representing the levels of the available
menus. Each menu begins on the left with the front panel key for that menu, with
each subsequent softkey level indented from there. Available choices, ranges, or
limits are shown in italics where appropriate. GPIB commands that are related to
the menu selections are shown on the far left in brackets. Refer to Chapter 6,
GPIB Operation for information on using GPIB.
Note that many menu choices are conditional depending upon the meter’s opera
-
tion mode, so that some menu options may not always be available as shown.
Refer to Chapter Four, Operation, for more detailed explanations of menu
functions.
C-2
SENSOR MENU
The Sensor menu presents controls for sensor data processing.
Sensor
Setup
SENSOR NOT in ML2437A
A|B
[SENMO] OPTION TRMS/FCW } Only display when universal power sensor with
option 01 data is connected to selected input.
[SENMM] Measurement MODE } available in readout and power vs. time
} system setup modes
Default | mod average | custom
[SENSTL] SETTLE% per reading } available in readout and power vs. time system
} setup modes with default measurement mode
0.01 to 10%
[RGH] Range HOLD } not available in power vs. time system setup
} mode
Auto|1to5
CalFactor
SENSOR } not in ML2437A
A|B
ML2430A OM C-1