Filter
Top Products
terminator:
%
PCT
EN
Remarks:
Same as the ML24XXA (native) CFADJ command. Sets a calibration factor
to be used when performing a 0 dBm calibration.
Examples:
CL98.5EN
CL98.5%
CL98.5PCT
CS Clear all status bytes
Syntax:
CS
Remarks:
Same as the *CLS command. Resets all of the GPIB status registers and
clears the input queue.
DA Display All
Syntax:
DA
Remarks:
Turns on all the segments of the display to verify proper operation. The dis-
play is returned to normal when another command is sent.
DD Display disable
Syntax:
DD
Remarks:
Turns the display off to allow faster measurements to be taken.
Related
Commands:
DE
DE Display enable
Syntax:
DE
Remarks:
Return the display to normal operation after the display has been set in DD
mode.
ML2430A OM 6-119
GPIB OPERATION HP 438A EMULATION COMMANDS