Filter
Top Products
AN EXAMPLE
PROGRAM IN C
#include <stdio.h>
/* include the NI 488.2 GPIB include file */
#include “DECL.H”
/* LINK with MCIB.LIB */
/* Compiled with BorlandC++ 2.0 */
void main()
{
int i;
char buffer[10][20];
/* clear buffer */
memset(buffer,0,200);
SendIFC(0);
if ( ibsta & ERR )
{
printf(“GPIB error\nibsta: %0x\niberr: %i\n\n”, ibsta,
iberr);
exit(1);
}
/* Setup ML2430A at address 13 */
/* FAST mode (output readout channel 1)
Send(0, 13, “*RST; FAST ON”, 13L, NLend);
/* Loop 10 times and store readings */
for(i=0; i<10; i++)
Receive(0, 13, buffer[i], 20, STOPend);
/* display readings.. */
for(i=0; i<10; i++)
printf(“Reading %i = %s”, i+1, buffer[i]);
}
5-16
OPERATOR
MAINTENANCE
The ML2430A Series does not require any operator maintenance. All re
-
pairs must be performed by qualified service personnel only. Refer to Ta
-
ble 2-1 for the nearest Anritsu Service Center.
5-24 ML2430A OM
OPERATOR MAINTENANCE PROCEDURES