Filter
Top Products
Syntax:
MODRED <count>
count:
0 to 10
Remarks:
Sets the number of retrys after a failure to connect. The delay between
retrys is set using MODDEL. See Section 5-10 for more information on mo
-
dem operation.
Query:
MODRED?
Returned
String:
MODRED <count>
MODRNG Autodial enable for range error
SYSTEM
Syntax:
MODRNG <state>
value:
TRUE or FALSE
Remarks:
When set to TRUE, produces an SRQ and autodials the phone number
(set with MODPH) when a sensor range error occurs. See Section 5-10 for
more information on modem operation.
Query:
MODRNG?
Returned
String:
MODRNG <state>
MXGDB Output Max Graph Binary Data
DATA OUTPUT
Syntax:
MXGDB
Remarks:
Available in graph modes only. Outputs in binary form the max graph data
to the GPIB in the long integer form of 1024 bits per dB as a definite length
arbitrary block response data. The C programming example 'Binary output
decoding' on page 6-133 shows how to extract the binary data. The re
-
sponse form is as follows :
MXGDB <#><length><number_of_bytes><data_byte_1><data_byte_2>
...<data_byte_n><\n>
<length> number of ASCII characters that make up the number_of_bytes
value
<number_of_bytes> number of bytes of data contained in rest of the string
<data_byte_n> four of these values make up the long integer.
For example: FF FF D1 64 = –11932 As it is based on 1024 per dB, divide
by 1024 to get the dB value (–11.652).
MXGD Output Max Graph Data
DATA OUTPUT
6-56 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION