Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 101
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
5. Polling Interval (1–10080 min): Click in the “Polling Interval” text box and
specify the polling interval.
6. Update Setting: Click on the “Update Setting” button when you finish NTP
Setting.
Daylight Saving Setting:
1. Daylight Saving Mode: Click on the "Daylight Saving Mode" drop-down menu
from "Daylight Saving Mode" drop-down list to choose "Disable," "Weekday,"
or "Date" to choose disable, weekday, or date daylight saving for the Hardened
Ethernet Extender Switch.
2. Time Set Offset (1–1440 min): Click in the "Time Set Offset" text box and spec-
ify the offset time of daylight saving. For example enter 60 for one hour offset.
3. Daylight Savings Timezone: Click in the "Daylight Saving Timezone" text box
and specify the daylight saving timezone. This can be any given name in
14-character alpha-numericals. Enter the Daylight-Savings time zone using the
following example:
EDT - East Daylight Savings Time Zone.
CDT - Central Daylight-Savings Time Zone.
MDT - Mountain Daylight-Savings Time Zone.
PDT - Pacific Daylight-Savings Time Zone.
ADT - Alaska Daylight-Savings Time Zone.
4. Weekday: Click in the text boxes and specify the daylight saving period.
Month: Click on the "Month" drop-down menu from "Month" drop-down list
to choose from January to December.
• Week: <1–5> Specifies weekdays from Monday to Friday.
Day: Click "Day" drop-down menu from "Day" drop-down list to choose from
Sunday to Saturday.
• Hour: <0–23> Specifies from 0 to 23.
• Minute: <0–59> Specifies from 0 to 59.
5. Date: Click in the text boxes and specify the daylight saving period.
Month: Click on the "Month" drop-down menu from the "Month" drop-down
list to choose from January to December.