Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 120
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use install image command to load configuration file from tftp server to Hardened
Ethernet Extender Switch.
3. Command Syntax:
install image IP-ADDRESS WORD
IP-ADDRESS specifies the IP address of tftp server.
WORD specifies the file name to be loaded to Hardened Ethernet Extender
Switch.
4. Example:
The following example specifies upgrading firmware (file name: flash.tgz) from
tftp server (IP address: 192.168.1.100) to Hardened Ethernet Extender Switch:
switch_a#install image 192.168.1.100 flash.tgz
switch_a#
Load config to TFTP server:
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use write config-file command to backup configuration file to tftp server.
3. Command Syntax:
write config-file IP-ADDRESS
IP-ADDRESS specifies the IP address of tftp server.
4. Example:
The following example backups configuration file to tftp server (IP address:
192.168.1.100):