Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 152
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
HOP_COUNT Maximum hops the BPDU will be valid for.
4. Example:
The following example specifies the maximum allowed hops (25) for BPDU in
bridge GROUP (1):
switch_a(config)#bridge 1 max-hops 25
switch_a(config)#
MSTP Instance Setting
Bridge Instance VLAN:
1. Command Mode: MST Configuration mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to MST Configuration mode.
The switch_a(config-mst)# prompt will show on the screen.
switch_a(config)#spanning-tree mst configuration
switch_a(config-mst)#
2. Usage:
Use this command to simultaneously add multiple VLANs for the corresponding
instance of a bridge. This command can be used only after the VLANs are
defined. Use the no parameter with this command to simultaneously remove
multiple VLANs for the corresponding instance of a bridge.
3. Command Syntax:
bridge GROUP instance INSTANCE_ID vlan VLAN_ID
no bridge GROUP instance INSTANCE_ID vlan VLAN_ID
GROUP <1-1> Specify the bridge-group ID.
INSTANCE_ID <1-15> Specify the instance ID.
VLAN_ID <1-4094> Specify multiple VLAN IDs corresponding to the bridge
instance
4. Example:
The following example associates multiple VLANs (10) and (20) to instance (1) of
bridge GROUP (1):