Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 188
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
4. Example:
The following example shows Ethernet Extender port (vdsl1) status:
switch_a>show vdsl status interface vdsl1
VDSL Counters
1. Command Mode: Exec mode
Logon to Exec Mode (View Mode).
The switch_a> prompt will show on the screen.
switch_a>
2. Usage:
Use this command to show Ethernet Extender port counters.
3. Command Syntax:
show vdsl counter interface IFNAME
IFNAME Interface name.
4. Example:
The following example shows Ethernet Extender port (vdsl1) counters:
switch_a>show vdsl counter interface vdsl1
6.12 Other Protocols
GVRP, IGMP Snooping, NTP
GVRP
GVRP:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#