Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 187
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
Table 6-3. VDSL fixed rates.
Rate
1 Set fixed rate to 1 Mbps
3 Set fixed rate to 3 Mbps
5 Set fixed rate to 5 Mbps
10 Set fixed rate to 10 Mbpss
15 Set fixed rate to 15 Mbps
20 Set fixed rate to 20 Mbps
25 Set fixed rate to 25 Mbps
30 Set fixed rate to 30 Mbps
40 Set fixed rate to 40 Mbps
50 Set fixed rate to 50 Mbps
4. Example:
The following example specifies to set fixed rate bandwidth settings (50) in the
symmetric mode for Ethernet Extender port 1 (vdsl1):
switch_a(config)#interface vdsl1
switch_a(config-if)#vdsl sym-fixedrate 50
switch_a(config-if)#
VDSL Status
1. Command Mode: Exec mode
Logon to Exec Mode (View Mode).
The switch_a> prompt will show on the screen.
switch_a>
2. Usage:
Use this command to show Ethernet Extender port status.
3. Command Syntax:
show vdsl status interface IFNAME
IFNAME Interface name.