Filter
Top Products
Page 133
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
2. Usage:
Use this command to add MAC addresses to be allowed to access the port.
Use the no parameter with this command to delete MAC addresses to be allowed
to access the port.
3. Command Syntax:
port-security allowed-address MAC
no port-security allowed-address MAC
MAC the Media Access Control (MAC) address in the HHHH.HHHH.HHHH
format.
4. Example:
The following example adds MAC address 2222.2222.2222 to be allowed to
access the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#port-security allowed-address 2222.2222.2222
switch_a(config-if)#
6.4 Switching
Bridging, Static MAC Entry, Port Mirroring
Bridging
Aging Time (seconds):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify an ageing-out time for a learned MAC address. The
learned MAC address will persist till this specified time.
3. Command Syntax:
Bridge GROUP ageing-time AGEINGTIME
no bridge GROUP ageing-time