Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 46
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
5. Auto save: Click on the “Auto save” drop-down menu to choose “Disable” or
“Enable” from the “Auto save” drop-down list to disable or enable Auto save
for the Hardened Ethernet Extender Switch.
6. Auto save interval (5–65536 sec): Click in the “Auto save interval” text box and
type a decimal number between 5 and 65536.
7. Submit: Click on the “Submit” button when you finish the Auto save
configuration.
Figure 5-9. Upgrade firmware screen.
Firmware Upgrade
1. Filename: Click in the “Filename” text box and type the name of the file that
you intend to upgrade to the Hardened Ethernet Extender Switch.
2. TFTP server IP: Click in the “TFTP server IP” text box and type the TFTP server IP
address from where the file will be obtained.