Filter
Top Products
Page 88
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
Figure 5-52. Radius Server Setting screen.
Add Radius:
1. Add Radius: Click on the “Add Radius” button. The “Radius Server Setting”
window appears.
2. Radius Server IP: Click in the “Radius Server IP” text box and specify the IP
address of the remote radius server host.
3. Radius Server Port: Click in the “Radius Server Port” text box and specify the
UDP destination port for authentication requests. The host is not used for
authentication if set to 0.
4. Secret Key: Click in the “Secret Key” text box and specify the authentication
and encryption key for all radius communications between the Hardened
Ethernet Extender Switch and radius server. This key must match the encryption
used on the radius daemon. All leading spaces are ignored, but spaces within
and at the end of the key are used. If spaces are used in the key, do not
enclose the key in quotaion marks unless the quotation marks themselves are
part of the key.