Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 179
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
radius-server timeout SEC
no radius-server timeout
SEC <1-1000> The number of seconds for a Hardened Ethernet Extender Switch
to wait for a server host to reply before timing out. Enter a value in the range 1 to
1000.
4. Example:
The following example specifies 20 seconds for the Hardened Ethernet Extender
Switch to wait for a server host to reply before timing out:
switch_a(config)#radius-server timeout 20
switch_a(config)#
Retransmit:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify the number of times the Hardened Ethernet
Extender Switch transmits each radius request to the server before giving up.
3. Command Syntax:
radius-server retransmit RETRIES
no radius-server retransmit
RETRIES <1-100> Specifies the retransmit value. Enter a value in the range 1 to
100.
4. Example:
The following example specifies the retransmit value 12:
switch_a(config)#radius-server retransmit 12
switch_a(config)#