Filter
Top Products
Page 97
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
2. Dynamic VLAN creation: Click on the “Dynamic VLAN creation” drop-down
menu from “Dynamic VLAN creation” drop-down list to choose “Enable” or
“Disable” to enable or disable Dynamic VLAN creation. GARP (Generic
Attribute Registration Protocol) provides IEEE802.1Q compliant VLAN pruning
and dynamic VLAN creation on IEEE802.1Q trunk ports.
3. Update Setting: Click on the “Update Setting” button when you finish GVRP
Global Setting.
Per port setting (include LAG):
1. GVRP: Click on the “GVRP” drop-down menu from “GVRP” drop-down list to
choose “Enable” or “Disable” to enable or disable GVRP for the port.
2. GVRP applicant: Click on the “GVRP applicant” drop-down menu from “GVRP
applicant” drop-down list to choose “Active” or “Normal” to the port. Ports in
the GVRP active applicant state send GVRP VLAN declarations when they are in
the STP (Spanning Tree Protocol) blocking state, which prevents the STP bridge
protocol data units (BPDUs) from being pruned from the other port. Ports in
the GVRP normal applicant state do not declare GVRP VLANs when in the STP
blocking state.
3. GVRP registration: Click “on the GVRP registration” drop-down menu from the
“GVRP registration” drop-down list to choose “Enable” or “Disable” to enable
or disable GVRP registration to the port. Configuring an IEEE 802.1Q trunk port
in registration mode allows dynamic creation (if dynamic VLAN creation is
enabled), registration, and deregistration of VLANs on the trunk port.
4. Update Setting: Click on the “Update Setting” button when you finish Per port
setting.