Filter
Top Products
Page 182
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
3. Command Syntax:
dot1x timeout re-authperiod SECS
no dot1x timeout re-authperiod
SECS <1-4294967295> Specify the seconds between reauthorization attempts.
The default time is 3600 seconds.
4. Example:
The following example specifies to set the interval 25 seconds between
reauthorization attempts:
switch_a(config)#interface fe1
switch_a(config-if)#dot1x timeout re-authperiod 25
switch_a(config-if)#
6.11 VDSL
VDSL Configuration, VDSL Status, VDSL Counters
VDSL Configuration
VDSL Ports:
VDSL Retrain:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vdsl1 means Ethernet Extender port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vdsl1
switch_a(config-if)#
2. Usage:
Use this command to upgrade VDSL speed for Ethernet Extender port.
3. Command Syntax:
vdsl retrain