Filter
Top Products
Page 185
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
switch_a(config)#interface vdsl1
switch_a(config-if)#vdsl asym-fixedrate 59
switch_a(config-if)#
Symmetric Mode Max. Speed:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vdsl1 means Ethernet Extender port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vdsl1
switch_a(config-if)#
2. Usage:
Use this command to set Max. Speed settings in the symmetric mode for Ethernet
Extender port.
3. Command Syntax:
vdsl maxspeed SPEED
Table 6-2. Maximum VDSL speed.
Speed
1 Set maximum speed to 1 Mbps
3 Set maximum speed to 3 Mbps
5 Set maximum speed to 5 Mbps
10 Set maximum speed to 10 Mbps
15 Set maximum speed to 15 Mbps
20 Set maximum speed to 20 Mbps
25 Set maximum speed to 25 Mbps
30 Set maximum speed to 30 Mbps
40 Set maximum speed to 40 Mbps
50 Set maximum speed to 50 Mbps