Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 119
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
switch_a(config)#
ARP Table
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use show arp-table command to view ARP Table.
3. Command Syntax:
show arp-table
4. Example:
The following example shows the ARP Table of switch:
switch_a#show arp-table
Route Table
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use show route-table command to view Route Table.
3. Command Syntax:
show route-table
4. Example:
The following example shows the Route Table of switch:
switch_a#show route-table
Save Configuration
Load config from TFTP server:
1. Command Mode: Privileged Exec mode