Black Box 8-port 10/100base-tx hardened ethernet extender switch Network Hardware User Manual


 
Page 42
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
Figure 5-5. Update setting screen.
IP Address
1. IP Address: Click in the “IP Address” text box and type a new address to
change the IP Address.
2. IP Subnet Mask: Click in “IP Subnet Mask” text box and type a new address to
change the IP Subnet Mask.
3. Submit: Click on the “Submit” button when you finish these selections.
4. You need to enter the new IP address on the browser and reconnect to the
Hardened Ethernet Extender Switch after IP or subnet mask are changed.
5. Default Gateway: Click on the “Default Gateway” drop-down menu to choose
“Disable” or “Enable” from the “Default Gateway” drop-down list to disable
or enable Default Gateway Setting for the Hardened Ethernet Extender Switch.
Click the text box and type a new address to change the Default Gateway.
(Need to choose “Enable” from the “Default Gateway” drop-down menu.)