Filter
Top Products
154 Dell Printer Configuration Web Tool
Auto Receive
Answer/Fax
Sets the interval at which the printer goes into the fax receive
mode after the external answering machine receives an incoming
call.
Line Monitor Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Ring Tone
Volume
Sets the volume of the ring tone, which indicates that an
incoming call is a telephone call through the internal speaker
when Receive Mode is set to Telephone/Fax.
Line Type Sets the line type.
Tone/Pulse Sets the dialing type.
Resend Delay Specifies the interval between transmission attempts.
Redial Attempts Specifies the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer will not
redial.
Redial Delay Specifies the interval between redial attempts.
Junk Fax Setup Sets whether to reject faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered in the Phone
Book.
Remote Receive Sets whether to receive a fax by pressing a remote receive code on
the external telephone.
Remote Receive
Tone
Specifies the remote receive code in two digits to start Remote
Receive.
Fax Header Sets whether to print the information of sender on the header of
faxes.
Fax Header
Name
Sets the name of sender to be printed on the header of faxes. Up
to 30 alphanumeric characters can be entered.
Fax Number Sets the fax number of the printer to be printed on the header of
faxes.
Fax Cover Page Sets whether to attach a cover page to faxes.
DRPD Pattern Sets the DRPD setting from Pattern 1 to Pattern 7. DRPD is a
service provided by some telephone companies.
Sent Fax Forward Sets whether to forward incoming faxes to a specified destination.
Fax Forward
Number
Specifies the fax number of the destination to which incoming
faxes will be forwarded.