Dell 1355 Printer User Manual


 
Dell Printer Configuration Web Tool 167
NOTE: The settings in the Port Settings page will be valid only when the printer is
rebooted. When you change or configure the settings, click the Apply New Settings
button to apply the new settings.
Wireless LAN (Dell 1355cnw Multifunction Color Printer only)
Purpose:
To configure wireless network settings.
Ethernet
*1
Ethernet
Settings
Auto
*
Detects Ethernet transmission
rate and the duplex settings
automatically.
10Base-T Half-
Duplex
Selects 10Base-T Half-Duplex
as the default value.
10Base-T Full-
Duplex
Selects 10Base-T Full-Duplex
as the default value.
100Base-TX
Half-Duplex
Selects 100Base-TX Half-
Duplex as the default value.
100Base-TX Full-
Duplex
Selects 100Base-TX Full-
Duplex as the default value.
Current Ethernet Settings Displays the current settings of
Ethernet.
MAC Address Displays the MAC address of
the printer.
Port Status LPD Specifies whether to enable LPD.
Port9100 Specifies whether to enable Port9100.
E-Mail Alert Specifies whether to enable the E-Mail Alert
feature.
SNMP Specifies whether to enable the SNMP.
WSD Specifies whether to enable the WSD port.
Bonjour
(mDNS)
Specifies whether to enable the Bonjour(mDNS)
feature.
Status Messager Specifies whether to enable the Status Messager.
LLTD Specifies whether to enable LLTD.
*1
This item is available only when the printer is connected with a wired network.