Filter
Top Products
Understanding the Tool Box Menus 333
Printer Maintenance
The Printer Maintenance tab contains the System Settings, Date & Time,
Paper Density, Adjust BTR, Adjust Fuser, Registration Adjustment, Adjust
Altitude, Reset Defaults, Non-Dell Toner, BTR Refresh Mode, Web Link
Customization, TCP/IP Settings, Tray Settings, EWS, Scan Defaults, Fax
Defaults, Copy Defaults, and Fax Settings pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
System Settings
Purpose:
To configure the power saving mode, auto clear time, warning tones, time-out
time, operator panel language settings, job log auto print, and mm/inch
setting.
Va l ue s :
Power Saver
Timer
Sleep
*1
5 minutes* Specifies the time taken by
the printer before it enters
Sleep mode after it finishes
a job.
5– 30 minutes
Deep Sleep 6 minutes* Specifies the time taken by
the printer before it enters
Deep Sleep mode after it
goes into Sleep mode.
1–6 minutes
Auto Reset 45 seconds* Specifies the time taken by the printer before it
automatically resets the settings for Copy, Scan, or Fax
on the operator panel to the defaults when no
additional settings are made.
1 minute
2 minutes
3 minutes
4 minutes
Alert Tone Panel Select
Tone
Off* Does not emit a tone when the operator
panel input is correct.
Low Emits a tone at the specified volume
when the operator panel input is correct.
Medium
High