Dell 1355 Printer User Manual


 
Print Media Guidelines 195
Use metal clasps, string ties, or metal folding bars
Have an interlocking design
Have postage stamps attached
Have nicked edges or bent corners
Have rough, cockle, or laid finishes
Labels
Your printer can print on many labels designed only for use with laser printers.
When selecting labels:
Label adhesives, face sheet (printable stock), and topcoats must be able to
withstand temperatures of 205°C (401°F) and pressure of 25 pounds per
square inch (psi).
Use labels that can be without sealing, excessive curling, wrinkling, or
releasing hazardous emissions.
Do not use label sheets with a slick backing material.
NOTICE: Before buying large quantities of any print media, it is recommended that
you try a sample first.
When printing on labels:
Use labels that can withstand temperatures of 205°C (401°F) without
sealing, excessive curling, wrinkling, or releasing hazardous emissions.
Set the paper type to Label from the printer driver.
Do not load labels together with paper in the same tray.
Do not print within 1 mm (0.04 inches) of the die-cut.
Do not print within 1 mm (0.04 inches) of the edge of the label, of the
perforations, or between die-cuts of the label.
Do not print a label through the printer more than once.
Portrait orientation is preferred, especially when printing bar codes.
Do not use labels that have exposed adhesive.
Use full label sheets. Partial sheets may cause labels to peel off during
printing, resulting in a jam.