Filter
Top Products
318 Faxing
1
Access the
Secure Receive Set
menu by following steps 1 to 6 in
"To turn the secure receiving mode on:".
2
Press the button until
Disable
is highlighted, and then press the
button.
3
To return to the previous screen, press the
(Back)
button.
Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the back of
your printer as shown above.
• Set your printer to the
Ans/FAX Mode
and set
Auto Rec Ans/FAX
to specify the time for the TAD.
• When the TAD picks up the call, the printer monitors and takes the line if
fax tones are received and then starts receiving the fax.
• If the answering device is off, the printer automatically goes into the
Fax
after the ring tone sounds for a predefined time.
• If you answer the call and hear fax tones, the printer will answer the fax call
if you
Set
On Hook
to
On
(you can hear voice or fax tones from the remote
machine), and then press the
(Start)
button and hang up the receiver.
OR
Press the two-digit remote receive code and hang up the receiver.
To the
wall jack
Printer Line
Telephone Answering Device Phone