Filter
Top Products
310 Faxing
The remote receive code is set to Off at the factory. You can change the two-
digit number to whatever you choose. For details on changing the code, see
"Available Fax Settings Options" on page 291.
NOTE: Set the dialing system of your external telephone to DTMF.
Receiving Faxes Using the DRPD Mode
The DRPD is a telephone company service which enables a user to use a
single telephone line to answer several different telephone numbers. The
particular number someone uses to call you on is identified by different
ringing patterns, which consist of various combinations of long and short
ringing sounds.
Before using the Distinctive Ring Pattern Detection option, Distinctive Ring
service must be installed on your telephone line by the telephone company.
To set up Distinctive Ring Pattern Detection, you will need another
telephone line at your location, or someone available to dial your FAX
number from outside.
To set up the DRPD:
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
button.
3
Press the button until
Admin Menu
is highlighted, and then press
the button.
4
Press the button until
Fax Settings
is highlighted, and then press
the button.
5
Press the button until
DRPD Pattern
is highlighted, and then press
the button.
6
Press the button until the desired menu item is highlighted, and then
press the button.
7
To return to the previous screen, press the
(Back)
button.
To receive faxes in the DRPD, you need to set the menu to DRPD Mode; see
"Available Fax Settings Options" on page 291.
Your printer provides seven DRPD patterns. If this service is available from
your telephone company, ask your telephone company which pattern you
need to select to use this service.