Filter
Top Products
248 Copying
2
Press the
(Copy)
button.
3
Press the button until
Margin Top/Bottom
is highlighted, and
then press the button.
4
Press the or button or enter the desired value using the numeric
keypad, and then press the button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
5
Press the
(Start)
button to begin copying.
Margin Left/Right
To specify the left and right margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2
Press the
(Copy)
button.
3
Press the button until
Margin Left/Right
is highlighted, and
then press the button.
4
Press the or button or enter the desired value using the numeric
keypad, and then press the button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
4 mm*/0.2
inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-
2.0 inch