Filter
Top Products
Faxing 293
Prefix Dial
NOTE: Prefix Dial only supports the environment where you send a fax to the
external line number. To use Prefix Dial, you must do the following from the operator
panel.
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
button.
3
Press the button until
Admin Menu
is highlighted, and then press
the button.
Fax Fwd
Number
Specifies the fax number of the destination to which incoming
faxes will be forwarded.
Prefix Dial Specifies whether to set a prefix dial number.
Prefix Dial
Num
Sets a prefix dial number of up to five digits. This number dials
before any auto dial number is started. It is useful for accessing the
Private Automatic Branch Exchange (PABX).
Discard Size Sets whether to discard text or images at the bottom of a fax page
when the entire page does not fit onto the output paper. Selecting
Auto Reduction automatically reduces the fax page to fit it onto
the output paper, and does not discard any images or text at the
bottom of the page.
ECM Sets whether to enable the ECM. To use the ECM, the remote
machines must also support the ECM.
Modem Speed Specifies the fax modem speed when a fax transmission or
reception error occurs.
Fax Activity Sets whether to automatically print a fax activity report after every
50 incoming and outgoing fax communications.
Fax Transmit Sets whether to print a transmission report after every fax
transmission or only when an error occurs.
Fax Broadcast Sets whether to print a transmission report after every fax
transmission to multiple destinations or only when an error occurs.
Protocol
Monitor
Sets whether to print a protocol monitor report after every fax
transmission or only when an error occurs.
Country Sets the country where the printer is used.
Option Description