Dell 1355 Printer User Manual


 
Faxing 291
8
If necessary, repeat steps 5 to 7.
9
To return to the previous screen, press the
(Back)
button.
Available Fax Settings Options
You can use the following settings options for configuring the fax system:
Option Description
Receive Mode TEL Mode Automatic fax reception is turned off. You can receive
a fax by picking up the handset of the external
telephone, pressing the remote receive code, and then
pressing .
FAX
Mode*
Automatically receives faxes.
TEL/FAX
Mode
When the printer receives an incoming fax, the
external telephone rings for the time specified in Auto
Rec TEL/FAX, and then the printer automatically
receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that
the call is a telephone call.
Ans/FAX
Mode
The printer can share a telephone line with an
answering machine. In this mode, the printer will
monitor the fax signal and pick up the line if there are
fax tones. If the phone communication is using serial
transmission in your country (such as Germany,
Sweden, Denmark, Austria, Belgium, Italy, France and
Switzerland), this mode is not supported.
DRPD
Mode
Before using the Distinctive Ring Pattern Detection
(DRPD) option, a distinctive ring service must be
installed on your telephone line by the telephone
company. After the telephone company has provided a
separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that
specific ring pattern.
Auto Rec Fax Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call.
Auto Rec
TEL/FAX
Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call.