![](http://pdfasset.owneriq.net/0/3c/03c56d1f-e6ca-48bf-82fd-5424c2fb8f14/03c56d1f-e6ca-48bf-82fd-5424c2fb8f14-bg1e9.png)
Troubleshooting 487
Bead-Carry-Out (BCO)
Auger mark
Action Yes No
1 If the printer is installed in a high altitude
location, set the altitude of the location.
1
Launch the Tool Box, and click
Adjust
Altitude
on the
Printer Maintenance
tab.
2
Select the value close to the altitude of the
location where the printer is installed.
Is the problem recovered?
The task is
complete.
Contact Dell.